RaySphere太陽光模擬器絕對輻照度測量儀
價 格：詢價
產 地：更新時間：2021-01-17 19:40
品 牌：型 號：RaySphere太陽光模擬器絕對輻照度測量儀
狀 態：正常點擊量：1275
400-006-7520
聯系我時，請說明是在上海非利加實業有限公司上看到的，謝謝！
聯 系 人：
上海非利加實業有限公司
電 話：
400-006-7520
傳 真：
400-006-7520
配送方式：
上海自提或三方快遞
聯系我時請說在上海非利加實業有限公司上看到的,謝謝！
Meet the new optical measurement system for absolute irradiance measurements of solar simulators ａnd other radiant sources. The new RaySphere from Ocean Optics measures absolute irradiance over spectral ranges from the UV to the NIR （350 to 1700 nm）.
This portable system is ideal for solar simulator manufacturers ａnd research ａnd development labs as a tool to validate the output of installed solar flashlamps. The flash of a solar simulator is used within the photovoltaic （PV） manufacturing process for the binning of cells according to spectral response ａnd for final PV module efficiency measurements.
The RaySphere system delivers the accuracy ａnd resolution needed to measure ａnd analyze the performance ａnd stability of the flasher with ultralow jitter triggering electronics for timing the measurement to the flashes. Calibration has been validated by an accredited certification lab to ensure accurate detection, enabling evaluation ａnd qualification of the spectral distribution of solar flashers ａnd simulators according to the IEC60904-9 （2007） standard.
The system includes two thermoelectrically cooled detectors that perform repeatable ａnd accurate spectral analysis of solar flashers from 350 to 1700 nm, ａnd a second version contains a single cooled detector for measurement to 1100 nm.
RaySphere includes high-speed electronics ａnd an intuitive powerful software interface. Brief measurement times enable detection of a complete spectrum during a flash or even during a portion of the flash. The measurement can be triggered by a fast response photodiode that reacts on the increasing intensity of the flashlight with sub-microsecond response times.
Trigger Mode
Features
- Intuitive graphical interface
- Graphical ａnd table display of classification results by wavelength bin
- Output of actual spectra in mW/cm^2/nm
- Output of actual measurement ａnd triggering timing with +/- 41 µs resolution
- Printable classification report
Under the Hood
| | RaySphere | RaySphere 1700 |
| Spectral range: | 350-1100 nm | 300-1700 nm |
| Spectral resolution: | 1.9 nm （FWHM） for 300 - 1100 nm
12.5 nm （FWHM） for 1100-1700 nm |
| Optical input: | 50 mm integrating sphere |
| Detector types: | TEC stabilized Hamamatsu CCD sensor | TEC stabilized Hamamatsu InGaAs sensor |
| Dynamic range: | 25000:1 （Back-thinned Si）
15000:1 （InGaAs） |
| Corrected linearity: | >99.8% |
| Minimum integration time: | 8 ms |
| Calibration: | Calibrated for irradiance measurements using national traceable standards （NIST, PTB, CNIM） |
| Calibration Accuracy: | Validated by accredited certification institute, typical values better than 2% accuracy in 400-1100 nm range |
| Triggering options: | Built-in photo trigger, external trigger, manual trigger |
| Operating environment: | Ambient Temperatures 10-35 ºC |
| Software: | Custom Analysis Software for Windows XP, Vista ａnd 7 （32 ａnd 64 bit） |
| Communications: | USB 2.0 high-speed |
Photo-Trigger Specifications
| Jitter （Realtime）: | <100 ns |
| Jitter （Software displayed）: | 164 µs |
| Minimum measurement time: | ~9 ms |
| Programmable trigger delay: | 1040 µs - 168 ms |
| Trigger delay increment: | 2.56 µs |
| Time resolution of display: | +/- 41 µs |
滬公網安備31011502016460號
