| Turntable旋轉工作臺 | |
| Top diameter直徑 | 150mm |
| Centering range中心調節范圍 | ±3mm |
| Leveling range水平調節范圍 | ±1° |
| Rotating speed旋轉速度 | 4rpm, 6rpm, 10rpm |
| Rotating accuracy旋轉精度 | （0.02+6H/10000）μm |
| | | | （H = Probing height測量高度） |
| Max. Probing diamter測量直徑 | 100mm |
| Max. workpiece diamter工件直徑 | 440mm |
| Max. workpiece load工件重量 | 10kg |
| Column unit立柱單元 | |
| Straightness of column立柱垂直度 | 0.15μm/50mm |
| Parallelism of column立柱平行度 | 0.3μm/150mm |
| Vertical travel垂直行程 | 150mm |
| Max. Probing height （OD） 測量高度 | 150mm（外徑） |
| Max. Probing height （ID） 測量高度 | 150mm（內徑） |
| Max. Probing depth 測量深度 | 90mm |
| Horizontal arm travel橫向臂行程 | 75mm |
| Probe unit探測單元 | |
| Measuring range測量范圍 | ±400μm |
| Measuring force測量力 | 70 - 10mN |
| Standard stylus標準測針 | φ1.6mm carbide sphere硬質合金球 |
| Recording magnification記錄放大倍率 | 5X~50,000X auto or arbitrary自動或任意 |
| Cut-off value截取值 | 15upr, 50 upr, 150 upr, 500 upr, 15-150 upr, |
| | | | 15-500 upr, 50-500upr or arbitrary任意 |
| Data analysis items數據分析項目 | Roundness, concentricity, co-axiality, |
| | | | circular runout, squareness, cylindricity |
| | | | thickness deviation, flatness, parallelism, straightness |
| Analysis software測量分析 | ROUNDPAK Ver.5 |
| Air pressure空氣壓力 | 390kPa（4kg/cm2） |
| Air consumption空氣消耗量 | 30 liters/min |
| Power supply電源 | 100V~240V/50Hz |
| Power consumption電源消耗量 | 200VA |
滬公網安備31011502016460號
